 |
The ADM5201 advanced handheld automotive multimeter combines all
the features of a full function multimeter and integrates
the functions of an O2 Sensor tester, PFI & TBI Fuel
Injection tester. The ADM5201 provides a quick and accurate
diagnosis of the complete O2 circuit. It is also capable of
sending a Rich/Lean signal to the ECM, and displaying
crossing-per-second (CC) and O2 voltage simultaneously, when
secondary display shows test results. This professional
grade multimeter provides efficient trouble shooting
solutions to the most difficult problems encountered in
today's sophisticated automotive electronic systems.
The ADM5201 has a bright LED backlight. A battery access door allows users to replace the battery and fuse without breaking calibration seals! High impact over-molded case absorbs shock over more of the case than a conventional rubber boot design. Convenient closed case calibration allows adjustments to be made directly through the Optically-Isolated RS232 serial port. Three year limited warranty. Features • Testing functions include: O2 Sensor Test, Ground Test, Battery and Alternator Charging Systems Test, and Battery Drain Test • Accurate RPM measurements for 2 and 4 stroke automotive engines with 1 to 12 cylinders using the inductive pickup • ms-pulse Width function to test on-time of both PFi type and TBI type fuel injectors • Duty Cycle and direct DWELL reading • 4 step adjustable triggers on 1 to 12 cylinders • Temperature measurement up to 2,372˚F or 1,300˚C • 4-4/5 digit, 50,000 count primary and 9,999 count secondary dual display with bar-graph (Frequency range: 99,999 counts) • Backlit display • RS-232C optically isolated serial port • Memory store and recall (20 locations) • Auto hold. 50ms high speed MIN/MAX/Avg, and relative mode • 1ms Peak Mode • Auto-power off • High impact over-molded case • CE-mark • IEC 1010.1-92, CAT II 1000 V rating |
|||
 |
 |
 |
 |
|